AirSpy HF+¶
AIS-catcher
[-d serial number]
-gh
[setting value]
...
Gain settings specific for the AirSpy HF+ can be set on the command line with the -gh switch. The following command switches off the preamp:
AIS-catcher -gh preamp OFF
Please note that only AGC mode is supported so there are limited options.
Summary Settings¶
| Setting (JSON key / CLI setting name) | Type | Default | Description |
|---|---|---|---|
| Generic Options | |||
| sample_rate | integer | Device-specific | Sampling rate in Hz (0-20,000,000) |
| bandwidth | integer | 0 | Tuner bandwidth in Hz (0-1,000,000) |
| freqoffset | integer | 0 | Frequency correction in PPM (-150 to +150) |
| Specific Options | |||
| preamp | boolean | false | Enable/disable preamplifier |
| threshold | enum | LOW | AGC threshold setting ("HIGH" or "LOW") |